Publicaciones de Procesado de materiales estructurales avanzados.
| Título | Autores | Publicación |
|---|---|---|
| New low carbon Q&P steels containing film-like intercritical ferrite. | M.J. Santofimia, T. Nguyen-Minh, L. Zhao, R. Petrov, I. Sabirov, J. Sietsma. | Materials Science and Engineering A, 527 (2010) 6429-6439. DOI:10.1016/j.msea.2010.06.083 |
| Metal Matrix Composites. | A. Mortensen, J. LLorca, | Annual Review of Materials Research, 40, (2010) 407-410. DOI:10.1146/annurev-matsci-070909-104511 |
| Effect of glass-fiber hybridization on the behavior under impact of woven carbon fiber/epoxy laminates. | A. Enfedaque, J. M. Molina-Aldareguía, F. Gálvez, C. González, J. LLorca. | Journal of Composite Materials 44. In press, 2010. |
| Mechanical behavior and microstructural evolution of a Mg AZ31 sheet at dynamic strain rates. | I. Ulacia, N.V. Dudamell, F. Galvez, S. Yi, M.T. Perez-Prado, I. Hurtado. | Acta Materialia, 58 (2010) 2988-2998. DOI:10.1016/j.actamat.2010.01.029 |
| Effect of Al and Gd solutes on the strain rate sensitivity of magnesium alloys. | N. Stanford, I. Sabirov, G. Sha, A. La Fontaine, S.P. Ringer, M.R. Barnett. | Metallurgical and Materials Transactions A 41 (2010) 734-743. DOI:10.1007/s11661-009-0107-8 |
| Anisotropy of mechanical properties in high-strength ultra-fine-grained pure Ti processed via a complex severe plastic deformation route. | I. Sabirov, M.T. Perez-Prado, J.M. Molina-Aldareguia, I.P. Semenova, G.Kh. Salimgareeva, and R.Z. Valiev, | Scripta Mater., 2010, in press (DOI: 10.1016/j.scriptamat.2010.09.006) |
| Cutting performance of TiCN-HSS cermet in dry machining | J.A. Canteli, J.L. Cantero, N.C. Marin, B.Gomez, E. Gordo, M.H. Miguelez. | Journal of Materials Processing Technology. Vol 210 (1), páginas 122-128 (ISSN 0924-0136) (2010) |
| Influence of Fe content and particle size the on the processing and mechanical properties of low-cost Ti-xFe alloys | P. G. Esteban, E.M. Ruiz-Navas, E. Gordo. | Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing. Vol. 527 (21-22), páginas 5664-5669 (2010) |
| A novel method for producing Al-foams and evaluation of their compression behaviour | D. P. Papadopoulos, H. Omar, F. Stergioudi, S. A. Tsipas, H. Lefakis, N. Michailidis. | Journal of Porous Materials. En prensa,disponible online el 26 enero 2010. Doi 10.1007/s10934-009-9349-5 (2010). |
| Influence of particle size distribution and chemical composition of the powder on final properties of inconel 718 fabricated by metal injection moulding (MIM) | J.M. Contreras, A. Jiménez-Morales, J.M. Torralba. | Powder Injection Molding. Vol 4 (1), páginas 60-63, 2010 (ISBN 1753-1497) (2010). |
| La2O3-reinforced W and W-V alloys produced by hot isostatic pressing | A. Muñoz, M.A. Monge, B. Savoini, M.E. Rabanal, G. Garcés, R. Pareja. | J. of Nuclear Materials. Aceptada (2010) |
| Microstucture and Mechanical Properties of Ultra-Fine Grained Fe-14cr and ODS Fe-14cr Model Alloys | M. A. Auger, T. Leguey, A. Muñoz, M.A. Monge, V. de Castro, P. Fernández, G. Garcés, R. Pareja | Journal of Nuclear Materials , Aceptado. |
| Fabrication of novel sol–gel silica coatings reinforced with multi-walled carbon nanotubes. | López, A.J.; Ureña, A.; Rams, J. | Materials Letters, 20, 924-927, 2010 |
| Mechanical characterization of sclerotic occlusal dentin by nanoindentation and nanoscratch. | Martín, N.; García, A.; Vera, V.; Garrido, M.A.; Rodríguez, J. | American Journal of Dentistry, 23, No. 2, 108-112, 2010 |
| Comparison of the mechanical properties of dentin and enamel determined by different nanoindentation techniques: conventional method and continuous stiffness measurement.. | Giráldez, I., Garrido, M.A.; Gómez-del Río, T.; Ceballos, L.; Rodríguez, J. | Boletín de Cerámica y Vidrio, Vol. 49, 177-182. Sociedad Española de Cerámica y Vidrio, 2010 |
| Comparative analysis of the friction stir processing effects on as cast and rolled plates of aluminium alloys | M. Iordachescu, D. Iordachescu, M. Blasco, E. Scutelnicu | Metalurgia International, 14 (7), 99-104, 2009 |
| Contribution to the Classification of the Characteristic Flaws in Friction Stir Welded Aluminium Butt Joints | M. Iordachescu, D. Iordachescu, J.L. Ocaña, P. Vilaça, E. Scutelnicu | Welding in the World, 53, 259-264, 2009 |
| Cold press welding of Aluminium – Original theoretic and experimental approach | M. Iordachescu, D. Iordachescu, E. Scutelnicu | Metalurgia International, 14 (11), 71-78, 2009. |
| FSW - Characteristic flaws in Aluminium alloys joints | M. Iordachescu, D. Iordachescu, E. Scutelnicu | Metalurgia International, 14 (2), 135-139, 2009 |
| Material flow and hardening at butt cold welding of aluminium | M. Iordachescu, D. Iordachescu, J. Planas, E. Scutelnicu, J.L. Ocaña | Journal of Materials Processing Technology, 209 (9), 4255-4263, 2009 |
| Remote Laser welding of automotive thin sheets | J.L. Ocaña, D. Iordachescu, M. Blasco, M. Iordachescu | Metalurgia International, 14 (10), 10-15, 2009 |
| Arc welding of dissimilar metals; FEA and experiments in case of Copper - Carbon steel joints | E. Scutelnicu, M. Iordachescu, D. Iordachescu | Metalurgia International, 14 (7), 33-37, 2009 |
| High strength ultra-fine grained Titanium produced via a novel SPD processing route. | J.M. Molina-Aldareguia, M.T. Perez-Prado, R.Z. Valiev, I.P. Semenova, I. Sabirov. | International Journal of Material Forming, 3 (2010) 407-410. DOI:10.1007/s12289-010-0793-1 |
| Application of equal channel angular pressing with parallel channels for grain refinement in Aluminium alloys and its effect on deformation behaviour. | I. Sabirov, M.T. Perez-Prado, M. Murashkin, J.M. Molina-Aldareguia, E.V. Bobruk, N.F. Yunusova, R.Z. Valiev | International Journal of Material Forming, 3 (2010) 411-414. DOI:10.1007/s12289-010-0794-0 |
| Phase transformations during high pressure torsion of pure Zr and of a Zr-2.5%Nb alloy. | A.P. Zhilyaev, A. Sharafutdinov, M.T. Pérez Prado. | Advanced Engineering Materials, 12 (2010) 754-757. DOI:10.1002/adem.200900348 |
| Thermal stability of pure bcc Zr fabricated by high pressure torsion Materials. | M.T. Pérez-Prado, A. Sharafutdinov, A.P. Zhilyaev. | Materials Letters, 64 (2010) 211-214. DOI:10.1016/j.matlet.2009.10.049 |
| Local and global measures of the fracture toughness of metal matrix composites. | I. Sabirov, O. Kolednik. | Materials Science and Engineering A 527(2010) 3100-3110. DOI:10.1016/j.msea.2010.01.055 |
| An experimental and numerical study of the influence of local effects on the application of the fibre push-in test. | J. M. Molina-Aldareguía, M. Rodríguez, C. González, J. LLorca. | Philosophical Magazine 90. In press, 2010. |
| Effect of fiber, matrix and interface properties on the in-plane shear deformation of carbon-fiber reinforced composites. | E. Totry, J. M. Molina-Aldareguia, C. González, J. LLorca. | Composites Science and Technology 70 (2010) 970-980. DOI:10.1016/j.compscitech.2010.02.014 |
| Damage micromechanisms and notch sensitivity of glass-fiber non-woven felts: an experimental and numerical study. | A. Ridruejo, C. González, J. LLorca. | Journal of the Mechanics and Physics of Solids 58 (2010) 1628-1645. DOI:10.1016/j.jmps.2010.07.005 |
| Microtomographic investigation of damage in E911 steel after long term creep. | F. Sket, K.Dzieciolb, A.Borbélyb, A.R.Kaysser-Pyzallac, K.Mailed, R.Scheckd. | Materials Science and Engineering A, in press, 2010. DOI:10.1016/j.msea.2010.07.029 |
| Influence of the high pressure torsion die geometry on the allotropic phase transformations in pure Zr. | A.P. Zhilyaev, F. Gálvez, A. Sharafutdinov, M.T. Pérez-Prado. | Materials Science and Engineering A 527(2010) 16-17.DOI:10.1016/j.msea.2010.02.066 |
| Effect of equal channel angular pressing on the fracture behavior of commercially pure titanium. | I. Sabirov, R.Z. Valiev, I.P. Semenova, R. Pippan. | Metallurgical and Materials Transactions A 41 (2010) 727-733. DOI:10.1007/s11661-009-0111-z |
