Publicaciones de Comportamiento mecánico en condiciones extremas
| Título | Autores | Publicación |
|---|---|---|
| Temperature and strain rate effect on mechanical properties of ethylene-propylene block copolymers. | Gómez-del Río, T.; Salazar, A.; Cea, A.; Hernández, R.; Rodríguez, J. | Anales de Mecánica de la Fractura. 27 [2], 661-665, 2010 |
| Determination of the J-R curves of ethylene-propylene block copolymers by means of different J-integral methodologies | Salazar, A.; Garrido, M.A.; Rodríguez, J.; Martínez, A.B. | Anales de Mecánica de la Fractura. 27 [2], 673-678, 2010 |
| Determination of the J-R curves of ethylene-propylene block copolymers by means of different J-integral methodologies | Salazar, A.; Garrido, M.A.; Rodríguez, J.; Martínez, A.B. | Anales de Mecánica de la Fractura. 27 [2], 673-678, 2010 |
| Temperature and velocity transitions in dry sliding wear of Al–Li/SiC composites | Gómez-del Río, T. Rico, A.; Garrido, M.A.; Poza, P.; Rodríguez, J. | Wear 268, 700–707, 2009 |
| Dynamic fracture and fragmentation patterns of borosilicate laminate glasses. | Orgaz, F.; Gómez-del Río, T. | Boletín de Cerámica y Vidrio, Vol. 48, 267-272, 2009 |
| Influence of the notch sharpening technique on the fracture toughness of bulk ethylene-propylene block copolymers. | Salazar, A.; Rodríguez, J.; Segovia, A.; Martínez, A.B. | Polymer Testing, .29, 49-59, 2010 |
| Relevance of the femtolaser notch sharpening to the fracture of ethylene-propylene block copolymers. | Salazar, A.; Rodríguez, J.; Segovia, A.; Martínez, A.B. | European Polymer Journal. 46, 1896-1907, 2010 |
| The role of the notching damage on the fracture parameters of ethylene-propylene block copolymers. | Salazar, A.; Segovia, A.; Martínez, A.B.; Rodríguez, J. | Polymer Testing. 29, 824-831, 2010 |
| The effect of hydrothermal conditions on the fracture toughness of epoxy/poly(styrene-co-allylalcohol) blends. | Salazar, A.; G. Prolongo, S.; Rodriguez, J. | Material Letters 64, 167-169, 2010 |
| Plastic collapse of a stainless steel pressurized tube. | Poza, P.; Múnez, C.J.; Rodríguez, R.; Rodríguez, J. | Engineering Failure Analysis 17, 530–536, 2010 |
| Compression yielding of polypropylenes above glass transition temperature. | Gómez-del Río, T.; Rodríguez, J. | European Polymer Journal, 46, 1244-1250, 2010 |
| Influencia de la composición y microestructura sobre las propiedades mecánicas de aleaciones de wolframio | M.V. Aguirre, A. Martín, J.Y. Pastor, J. LLorca, M.A. Monge, y R. Pareja | Anales de Mecánica de la Fractura. 26, 75-80, 2009. |
| Comportamiento mecánico de Wolframio | M.V. Aguirre, A. Martín, J.Y. Pastor, J. LLorca, M.A. Monge, y R. Pareja. | Infaimon News, 18, 14, 2009. |
| Envejecimiento y pérdida de propiedades en los morteros de cemento reforzado con fibra de vidrio (GRC) | A. Enfedaque, D. A. Cendón, F. Gálvez, V. Sánchez-Gálvez | Anales de la Mecánica de Fractura 26, 531-536, 2009 |
| Failure analysis of impacted hybrid laminate composites using X ray tomography. | A. Enfedaque, F. Gálvez, C. González, J. Molina, G. Charalambous, J. Llorca | Actas del IX Congreso Nacional de Materiales Compuestos, 1045-1048, 2009. |
| Estudio de tenacidad de fractura de nuevas formulaciones de cementos óseos acrílicos | G. Frutos, J.Y. Pastor, N. Martínez, m.R. Virto, y S: Torrado. | Anales de Mecánica de la Fractura. 26, 27-32, 2009. |
| Propiedades mecánicas de ferritas ni-zn fabricadas mediante moldeo por inyección de polvos (PIM) | J. Gutiérrez, E. Rodríguez-Senín, B. Levenfeld, A. Várez, J.Y. Pastor, M.A. Paris. | X Congreso Nacional de Materiales. Sociedad Española de Materiales-Universidad de Mondragón, 2008. |
| Influencia de las condiciones de procesado en las propiedades mecánicas y magnéticas de ferritas Ni-Zn fabricadas mediant | A. Martín, J. Gutiérrez, E. Rodríguez-Senín, B. Levenfeld, J.Y. Pastor, A. Várez, y M. A. Paris. | Anales de Mecánica de la Fractura. 26, 118-123, 2009. |
| Mechanical Behavior of W-Y2O3 and W-Ti Alloys from 25 A degrees C to 1000 A degrees C | Aguirre MV, Martin A, Pastor JY, Llorca J, Monge MA, Pareja R | Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science, 40A (10), 2283-2290, 2009 |
| Failure Surface of Epoxy-Modified Fiber-Reinforced Composites Under Transverse Tension and Shear | L. P. Canal, J. Segurado y J. LLorca | International Journal of Solids and Structures, 46, 2265–2274, 2009. |
| Strain localisation during a tensile test on metallic plates: Experimental and numerical results | D.A Cendón, J.M. Atienza y M. Elices | Key Engineering Materials (Advances in Fracture and Damage Mechanics VIII), 569-572, 2009 |
| Lightweight polyethylene non-new felts for ballistic impact applications: Material characterization | S. Chocrón, A. Pintor, F. Gálvez, C. Rosselló. d. Cendón, V. Sánchez-Gálvez | Composites Part B: Engineering, 39 (7-8), 1240-1246, 2008 |
| Analysis of glass fiber reinforced cement (GRC) fracture surface | Enfedaque A.,Cendon DA, Gálvez F, Sánchez-Gálvez,V. | Construction and Building Materials, aceptado para publicación el 3 de Diciembre de 2009 |
| Dynamic fracture toughness of a high strength armor steel | F. Gálvez, D. Cendón, N. García, A. Enfedaque y V. Sánchez-Gálvez | Engineering Failure Analysis, 16, 2567-2757, 2009. |
| Splitting failure of precast prestressed concrete during the release of the prestressing force | J.C. Gálvez, J.M. Benítez, B. Tork, M.J. Casati y D.A. Cendón. | Engineering Failure Analysis, 16, 2618- 2634, 2009 |
| Influence of hydrides on the mechanical behaviour of zircaloy nuclear cladding along the hoop direction | M.A. Martin-Rengel, J. Ruiz-Hervías, F.J Gómez, L.Caballero, A. Valiente | Revista de Metalurgia, 45(4), 287-294, 2009 |
| Strength and Toughness of Cellular SiC at Elevated Temperature. | M. Presas, J. Y. Pastor, J. LLorca, A. Martín, J. Segurado, y C. González | Engineering Failure Analysis, 16, 2598-2603. 2009 |
| Fracture and fatigue failure in the Spanish codes for design of steel structures | A. Valiente | Engineering Failure Analysis 16 2658–2667, 2009 |
